您的位置: 标准下载 » 国内标准 » GB 国标 »

GB 223.41-1985 钢铁及合金化学分析方法 离子交换分离-连苯三酚光度法测定钽量

作者:标准资料网 时间:2024-05-05 02:50:59  浏览:9882   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:钢铁及合金化学分析方法 离子交换分离-连苯三酚光度法测定钽量
英文名称:Methods for chemical analysis of iron,steel and alloy; The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 冶金 >> 黑色金属
替代情况:替代YB 35(14)-1978
发布部门:国家标准局
发布日期:1985-07-18
实施日期:1986-06-01
首发日期:1985-07-18
作废日期:1900-01-01
主管部门:中国钢铁工业协会
提出单位:中华人民共和国冶金工业部
归口单位:冶金工业部钢铁研究总院
起草单位:冶金工业部钢铁研究总院
起草人:曹宏耀
出版社:中国标准出版社
出版日期:1900-01-01
页数:4页
适用范围

本标准适用于钢铁、合金钢、高温合金及精密合金中袒量的测定。测定范围:0.50一2.00N.
本标准遵守GB 1467-78《冶金产品化学分析方法标准的总则及一般规定》。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 黑色金属
下载地址: 点击此处下载
Product Code:SAE J1216
Title:Test Methods for Metric Threaded Fasteners (Cancelled Jul 1999)
Issuing Committee:Fasteners Committee
Scope:This standard establishes procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners.Property requirements and the applicable tests for their determination are specified in individual product standards. In those instances where the testing requirements are unique or at variance with these standard procedures, the product standard shall specify the controlling testing requirements.This standard describes mechanical tests for determining the following properties:For externally threaded fasteners:Product hardness (Section 4.1)Surface hardness (Section 4.2)Proof load (Section 4.3)Yield strength (Section 4.4)Axial tensile strength (Section 4.5)Wedge tensile strength (Section 4.6)Elongation (Section 4.7)Reduction of area (Section 4.7)For internally threaded fasteners:Product hardness (Section 5.1)Proof load (Section 5.2)
基本信息
标准名称:气体激光器总规范
英文名称:General specification for gas lasers
中标分类: 电子元器件与信息技术 >> 电真空器件 >> 其他电真空器件
ICS分类: 电子学 >> 光电子学、激光设备
替代情况:SJ 1870-1981
发布部门:国家技术监督局
发布日期:1994-01-02
实施日期:1995-07-01
首发日期:1994-12-07
作废日期:1900-01-01
主管部门:信息产业部(电子)
归口单位:信息产业部(电子)
起草单位:北京朝阳激光器械厂
出版社:中国标准出版社
出版日期:1995-07-01
页数:平装16开, 页数:12, 字数:20千字
书号:155066.1-11442
适用范围

本规范规定了气体激光器的通用要求。本规范适用于各类封离式气体激光器。本规范不适用于为国家安全利益保密使用的各类气体激光器;对在独立状态下的激光器的组合部件——激光器能源也不适用。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电子元器件与信息技术 电真空器件 其他电真空器件 电子学 光电子学 激光设备